ADT® Authorized Dealer Serving Lancaster & Surrounding Areas
close up of a lady adjusting the security panel
March 01, 2022

How To Reset Your Security System In Lancaster

One perk of having your security system installed by professionals is that you hardly ever have to concern yourself with it. Even so, there could be times where you have to reset your alarms in Lancaster. When using a smart command interface, resetting typically requires just one or two button tap following occurrences like battery changes, power outages, and false alarms.

Consult Your Manual Before Attempting An Alarm Reset

A word to the wise before you start resetting your Lancaster home security system, consult your instruction manual first. You wouldn’t want to compromise your home’s protection because you hit the wrong button. Also, control panels might have changed if you switched from a numbered keypad to a modernized touchscreen interface. And if you’re unable to figure out how to reset your system, don't hesitate to reach out to the professionals.

Resetting Your Lancaster Home Security System Due To A False Alarm

Generally, a false alarm takes place because of an accidentally tripped sensor. You can engage the central hub or bring up the ADT mobile app and touch the shield image and submit your unique passcode to switch off the system when this occurs. You might get a call from your 24-hour monitoring specialists, but just tell them it was a false alarm.

Tips To Reset Your Alarm When Experiencing A Power Outage In Lancaster

When you lose power due to high winds or other factors, you may start to hear a steady beep from your alarm’s central interface. This lets you know that your security is running off the secondary power source. To reset the alarm and silence the constant chirping, you need to deactivate and reactivate your system.

However, if you lose power for a longer period of time, you may need a total reset of your system. Pay careful attention to the instructions in the manual -- usually by submitting your unique passcode and hitting the designated button two times -- and you should be back to normal. You could continue to notice chirps from the backup power, as it may not cease until your battery reaches a full charge. Contact your home security specialists if you are still having difficulties with your ADT system at least 20 hours after the power is resumed.

Reset Your Home Security System After Switching Out A Battery

On occasion you will have to switch out a battery within one of your home security components. When this needs to be done, you want to set your system to Test Mode so you prevent setting off an alarm by accident. After the you replace the old battery, move the system from test mode and restore your usual settings. If the system doesn't recognize the component or the battery indicator stays on, you might have to perform a whole system reset.

Resetting Your Lancaster Security System After Adding Or Deleting A User

Removing or adding personal codes can be done on your ADT Command interface and the ADT Control mobile app. You shouldn't need a reset of your alarm after adding or removing codes. With that being said, if you relocate to a new house with an existing ADT system, you should call your home security professional at (717) 256-1587 to set up a new service. The installer will visit your property to switch out components, install more alarms or cameras (if necessary), and do a factory reset.

A Well-Designed Security System Is The Right Choice

Attempting to reset a home security system in Lancaster will likely be frustrating if it fails to include user-friendly devices and controls. If the time has come to get your functional and powerful home security system, dial (717) 256-1587 or send in the form below. Our team is happy to help customize the perfect security system for your property.